

Produced from - | |
---|---|
Until - | |
Home - | |
Export - | |
On Register - | 2 |
In Club - | 0 |
Latest - Propshaft for 3 Rail J-Type Overdrive Conversion -- Herald 1200
by cliftyhanger
< Anti burst door catches Replacing mechanical fuel pump Fuel brake pipes fitting > | ||||||
---|---|---|---|---|---|---|
![]() posts: 61 non member |
posted Mon 18th Jan 2021
After several years of nursing the original 1959 Herald mechanical fuel pump to keep it operating, I have decided to replace it with an electrical pump. So much choice and easy to get one that is not entirely suitable for my requirements. I would like some advice from anyone who has fitted a suitable, hassle-free pump. Ideally, the pump should be a bolt-on unit that also blanks off the hole where the old pump was fitted but I doubt if one exists. So, what is recommended? All replies gratefully received. |
|||||
Tags - Herald | ||||||
![]() posts: 2252 Spitfire & GT6 Model Consultant Cambridge group joined on Sun 11th Apr 1993 |
posted Mon 18th Jan 2021
reply 1 of 5
I recommend sticking with the mechanical pump, to be honest. I had so much hassle with the electric pump on my Vitesse that I reverted it. The Spitfire does still have an elecric pump - a Facet one - which works OK now that the fuel tank's been replaced, but has to be in the boot. If you insist on going electric, Huco and Facet are the two recommended makes. Make sure the one you get is a low pressure one - 1.5bar preferred, 2.5 absolute maximum. If you're fitting in the engine bay then you need one that's specified for that position - it needs a significant "lift" (the maximum height above the tank) to cope with hills... and the general condition of pipes. The one along the chassis is pretty small bore on a Herald. For blanking the hole in the engine, there's a plate that's readily available from MiniSpares and the like, because early Minis used the same fuel pump fitting as Triumphs, and late ones have electric pumps.
|
|||||
Tags - Herald | ||||||
![]() posts: 7684 non member |
posted Mon 18th Jan 2021
reply 2 of 5
I'll second that. There's no benefit to fitting an electric fuel pump to a standard engine. You'll gain nothing more than an extra item to go wrong. And that's coming from someone with a fuel pump delivering 250 lph at 5bar because I'm not running anything like a standard engine, if that means anything!
1964 Triumph 2000 - sleeping 1968 Triumph Herald 13/60 - fully standard and about 230bhp... daily driver 1981 Triumph Acclaim - daily driver by my finger and thumb
|
|||||
Tags - Herald | ||||||
![]() posts: 427 non member |
posted Wed 20th Jan 2021
reply 3 of 5
I binned the old one and fitted https://rimmerbros.com/Item--i-147876 https://www.merlinmotorsport.co.uk/p/malpassi-petrol-king-fuel-pressure-regulator-king-pet https://www.carbuilder.com/uk/fuel-filter-glass-chrome-with-8mm-hose-tails and never looked back
Hampshire Based Ford Anglia 105E (in the beginning ) |
|||||
Tags - Herald | ||||||
![]() posts: 9938 North London & Herts group joined on Wed 31st Oct 2007 |
posted Wed 20th Jan 2021
reply 4 of 5
I would buy a huco Low pressure, and engine bay mount is easier. Clive Senior |
|||||
Tags - Herald | ||||||
![]() posts: 25 joined on Sat 9th Dec 2017 |
posted Sat 23rd Jan 2021
reply 5 of 5
I went back to a mechanical pump on my spitfire engined Gentry no more probs |
|||||
Tags - Herald | ||||||
Club Triumph Ltd. Registered in England No. 4961210 Registered Office: Suite A,10th Floor, Maple House, High Street, Potters Bar, Herts, EN6 5BS. VAT registration number 340 4536 26. Club Triumph is run entirely by its members for its members and does not have paid employees.
Website Terms and Conditions | Terms and Conditions of Sale | Privacy |Club Rules