| Produced from - | Jan 1970 |
|---|---|
| Until - | Jan 1976 |
| Home - | 0 |
| Export - | 0 |
| On Register - | 46 |
| In Club - | 12 |
Dolomite, 1500TC & Toledo Model Consultant
Dolomite, 1500TC & Toledo Model Consultant
Triumph Registrar
Forum -
Latest - Car wanted
by targaman
Gallery
Blog - no entries
Marketplace
| < Little White Tolly - TR7 engined Toledo WANTED pair rectangular headlamps 1300fwd crankshaft woe > | ||||||
|---|---|---|---|---|---|---|
 "Ian Perry"
posts: 123 North Hampshire group joined on Mon 15th May 2017 |
posted Mon 20th May 2019
As per title! Pair of rectangular headlamps - sealed beam or bulb type - wanted, please PM me if you have a pair sitting in the back of the shed collecting dust... (I'm in west Berkshire so obviously the north of Scotland could pose some logistic challenges - but everything's solvable in the end!) VMT Ian |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"Gt6s"
posts: 1814 Northern Ireland group joined on Tue 9th Jan 2018 |
posted Sun 26th May 2019
reply 1 of 13
I just might have a pair, Halogen bulb type. New originally supplied c/o a local bus company. I did have plans years ago to fit them in a modified Toledo. Never happened. Will have a look for them. BTW in Northern Ireland so will need to be posted. Laurence I remember being wrong once before Laurence Cochrane Newtownards Northern Ireland. 1972 Gt6 2600EFI The Mutt. Some original parts fitted, Not many ! Early PI motor overbored to 2.6. Lightened & balanced, ported chambered, cam'd 6-3-1 manifold. Running on DTA engine management system incorperating the PI throttle bodies fitted with electronic injectors and throttle position sensor. 0-60 4.7s & 7000rpm. Seriously annoys owners of modern stuff ! (particularly coz its a heap) 2500 S box with competition 28% od. 3.63 diff with a quaife in it, innit ! Rotoflex based rear but with a swing spring fitted & sliding shafts.(swing spring rotoflex without rotoflex's). Koni's front Spax rear. Hydraulic handbrake. Citroen xantia discs 11,1/4 in dia under Morris Garages 15 in Maestro alloys.
|
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"Gt6s"
posts: 1814 Northern Ireland group joined on Tue 9th Jan 2018 |
posted Tue 28th May 2019
reply 2 of 13
Have had a hunt. Only one very scabby bulb type. Must have fitted the halogen ones to the Toledo Sorry. Laurence I remember being wrong once before Laurence Cochrane Newtownards Northern Ireland. 1972 Gt6 2600EFI The Mutt. Some original parts fitted, Not many ! Early PI motor overbored to 2.6. Lightened & balanced, ported chambered, cam'd 6-3-1 manifold. Running on DTA engine management system incorperating the PI throttle bodies fitted with electronic injectors and throttle position sensor. 0-60 4.7s & 7000rpm. Seriously annoys owners of modern stuff ! (particularly coz its a heap) 2500 S box with competition 28% od. 3.63 diff with a quaife in it, innit ! Rotoflex based rear but with a swing spring fitted & sliding shafts.(swing spring rotoflex without rotoflex's). Koni's front Spax rear. Hydraulic handbrake. Citroen xantia discs 11,1/4 in dia under Morris Garages 15 in Maestro alloys.
|
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
 "Paudman"
posts: 2589 non member |
posted Fri 31st May 2019
reply 3 of 13
Are the bus ones a straight fit? I have contacts in Ulsterbus... Somewhere amongst all of these mega signatures, there might even be a post. |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"Gt6s"
posts: 1814 Northern Ireland group joined on Tue 9th Jan 2018 |
posted Sat 8th Jun 2019
reply 4 of 13
Quoted from Paudman- Same fitment but USUALLY halogen I remember being wrong once before Laurence Cochrane Newtownards Northern Ireland. 1972 Gt6 2600EFI The Mutt. Some original parts fitted, Not many ! Early PI motor overbored to 2.6. Lightened & balanced, ported chambered, cam'd 6-3-1 manifold. Running on DTA engine management system incorperating the PI throttle bodies fitted with electronic injectors and throttle position sensor. 0-60 4.7s & 7000rpm. Seriously annoys owners of modern stuff ! (particularly coz its a heap) 2500 S box with competition 28% od. 3.63 diff with a quaife in it, innit ! Rotoflex based rear but with a swing spring fitted & sliding shafts.(swing spring rotoflex without rotoflex's). Koni's front Spax rear. Hydraulic handbrake. Citroen xantia discs 11,1/4 in dia under Morris Garages 15 in Maestro alloys.
|
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"Jonny-Jimbo"
posts: 376 non member |
posted Tue 6th Aug 2019
reply 5 of 13
I think I have a pair of square bulbs, but couldn't say if they are sealed beam or not. I know I have a pair of front square grilles... 1968 Mk1 2000 w/ 2.5 - Alex's old car, very nice... just needs fettling!1962 Vitesse 6 - Slammed, caged, rusty, tatty, disgusting, the dogs doo-dahs. 1970 Herald 13/60 - Not much left of it at all. 1960 Herald 1200 - It's a rolling chassis and that's about it! 1988 BMW E30 320i 2 Door - New daily driver, too much of a bargain to refuse. Donald Healey's old car! 1978 Reliant Scimitar GTE - New project for me and Brother! 1970?/1988 Ginetta G4/4 - BINNED IT - Bought It - Rebuilding It! |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"Paudman"
posts: 2589 non member |
posted Fri 13th Sep 2019
reply 6 of 13
Quoted from Gt6s- I've managed to source a pair of Leyland Tiger Bus headlamps, but I'm not sure about the beam pattern - the bus had four. The bulb is a standard H4 three-pin and there's a pilot/ side light, so I think I may have a pair of dipped beam units which don't have the full beam capacity. Pity... I thought I was on to something there...
Somewhere amongst all of these mega signatures, there might even be a post. |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"cliftyhanger"
posts: 9935 North London & Herts group joined on Wed 31st Oct 2007 |
posted Fri 13th Sep 2019
reply 7 of 13
3 pin are dipped and main.... unless I have missed something. (at least H4 bulbs are thus, and old sealed beams) Clive Senior |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"Paudman"
posts: 2589 non member |
posted Fri 13th Sep 2019
reply 8 of 13
I was hoping that, Clive - thanks for confirming. The bulbs came without wiring or connectors so I can't confirm if that's the way they were used - enquiries on-going. I just need to check the beam pattern to see if all four lamps were the same, or if the inner and outer pairs differed in any way that wouldn't suit a car. Somewhere amongst all of these mega signatures, there might even be a post. |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"nang"
posts: 2415 non member |
posted Fri 13th Sep 2019
reply 9 of 13
The bulbs won't be any use to you. Leyland and indeed most bus bulbs will be 24 volt. you obviously will need 12 volt ones. Tony. If all else fails-Read the Instructions! 1998 Rover 600. Honda in disquise. |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"RobPearce"
posts: 2246 Spitfire & GT6 Model Consultant Cambridge group joined on Sun 11th Apr 1993 |
posted Sat 14th Sep 2019
reply 10 of 13
Inner (main only) headlights with H4 fitting are normally identical to the outer (main and dip) but with only two wires in the loom. Very occasionally you'll come across ones where the lens is missing the pattern that puts dip beam to the nearside, in which case your dip will be old-style (can't remember the cut-off on that but pre-1970)
|
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"Paudman"
posts: 2589 non member |
posted Sat 14th Sep 2019
reply 11 of 13
Tony's right - bulbs are indeed 24v but were supplied only to keep dirt out; I'll fit my own for beam testing. I've to go view a Toledo for sale within the next few days and will check on original beam pattern plus headlamp mounting.
Somewhere amongst all of these mega signatures, there might even be a post. |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"nang"
posts: 2415 non member |
posted Sun 15th Sep 2019
reply 12 of 13
The bus's twin lights are as follows. The ones with 3 terminals are low beam, high beam and earth. the ones with 2 terminals are high beam and earth only. So the 2 with 3 terminals are like your normal car lights. When switched to high beam the other two also light up giving you 4 headlights, the same as my Triumph 2500. I know as I work on buses every day. Just put 12volt lamps in and all will be well.🤓 Tony. If all else fails-Read the Instructions! 1998 Rover 600. Honda in disquise. |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
|
"Paudman"
posts: 2589 non member |
posted Sun 15th Sep 2019
reply 13 of 13
That's EXACTLY what I wanted to hear, Tony. I was hoping that was the case but it's great to have confirmation. Now: all I have to do is to get the mountings adapted to fit Triumphs, and I'll have a pair of working and fittable rectangular headlamps. Somewhere amongst all of these mega signatures, there might even be a post. |
|||||
| Tags - Dolomite Toledo Dolomite/Toledo/FWD | ||||||
Club Triumph Ltd. Registered in England No. 4961210 Registered Office: Suite A,10th Floor, Maple House, High Street, Potters Bar, Herts, EN6 5BS. VAT registration number 340 4536 26. Club Triumph is run entirely by its members for its members and does not have paid employees.
Website Terms and Conditions | Terms and Conditions of Sale | Privacy |Club Rules
Toledo 2 Door Saloon
